Sin categoría
Common Sprinkler System Problems
It is usual that when you have a sprinkler system problem eventually occur. These complicate people’s lives and have to be resolved urgently.
Within each of these systems there are connections that may present failures. They end up having consequences on the garden or the plants that are being watered.
Nowadays, external agents may be directly affecting sprinkler systems. That is why it is important to determine the root of the problem and solve it. Thus that you can anticipate them, we will mention 6 of the most frequent.
The 6 most recurring problems in a sprinkler system
The frequent problems that often occur in a sprinkler system deserve to be taken into account in advance, to prevent, identify and stop them. Next, we will help you to understand how they should be treated so that you can get the whole system working properly again.
1. Design problems
In some cases, the sprinkler system may need a design change. Maybe the garden in which it is located has undergone modifications.
It is totally normal for people to make structural changes in their gardens, moving plants or modifying the appearance they have. These movements usually require a change of the installed system.
2. Frost
During winter times the temperature tends to drop in some places to such a point that the water in the pipe’s freezes. In these cases, the water would not reach the sprinklers.
In these cases, a solution is usually achieved through air compression so that the hoses are unblocked.
The opportunity can be taken to verify that the pipes and hoses have not suffered cracks. Ice can cause damage that will leak water without being noticeable for long.
3. Problems with water quality
It is vital to take into account the quality of the water that is passing through the pipes of the irrigation system. A high percentage of calcium could be harmful. It is very likely that both the walls of the pipes and the hoses end up accumulating all this calcium and forming a blockage.
These problems are solved through chemical agents that perform a descaling process within the sprinkler system. Consequently, it ensures that the hoses are clean again and free of obstacles that do not allow the normal flow of water through them.
4. Mud inside the sprinkler system
It is a common problem that affects the irrigation system when it is supplied from an untreated source. The dried mud ends up blocking the passage of water in the valves. Cleaning the complete system is the most efficient solution in this regard and will allow irrigation to be constant again.
5. Not having constant pressure
Of the different problems that can occur in a sprinkler system, it is usually one of the most complicated, because the real reason is that, it is not always achieved. It can be due:
- to overuse of sprinklers,
- lack of power in the water,
- general failures within the pumping or
- sprinkler system in place.
For these types of problems, it is essential to know the exact cause that is affecting the pressure. Pressure changes are often called water hammer, where plants are often not adequately irrigated because the sprinkler system does not cover them.
However, it is a sprinkler system problem that can be prevented by conducting proper facility inspections.
6. Pressure deficiency
Another common cause of sprinkler system problem is insufficient pressure. Sprinklers do not build pressure to perform scheduled work. Rather, they depend on the pressure of the supply. If the pressure is less than necessary, the ends of the garden will not benefit.
It may be due to excess issuers. Perhaps it is due to defects in the same equipment. But it could be a mis adjustment of the valves, which allows the entry of air and the consequent decrease in pressure.
No more sprinkler system problems
Sometimes it can be difficult to determine what problem your sprinkler system is having. That is why we recommend you enlist the help of Complete Lawn Care Saenz & Co to resolve any situation that may arise in the garden.
